The new measurement system is almost ready. A galvanized steel pole slots into the ground, into a steel tube with a concrete footing and a cap when not in use. Triangulated ties attach to the fascia board, bolted in place to ensure stability. The main pole is 4m high. A block and tackle is used to lift the speaker from just above ground level. The old system was a back-breaker when it came to getting speakers up onto the turntable stand.
The new system also elevates the speaker higher than the mic stand will allow. A new and more stable mic stand is coming up next, with greater repeatability in position.
Not shown above is the turning mechanism, where a lever that looks like a periscope handle is attached to the bottom of the turntable.